Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Turn the device so that the back cover is facing you and locate the two screws at the top of the back cover. Using the Phillips #000 screwdriver, loosen the screws on the back cover. The screws do not come out, but may be loosened to allow for the back cover to be removed.
  • Turn the device so that the back cover is facing you and locate the two screws at the top of the back cover.

  • Using the Phillips #000 screwdriver, loosen the screws on the back cover.

  • The screws do not come out, but may be loosened to allow for the back cover to be removed.

  • Gently pry the tabs on the side of the device with the metal spudger or your thumbnail and lift off the back cover.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.