Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
If you did not remove the two 4 mm Phillips head screws in step 12, remove them now using the Phillips head screw driver. With the screws removed, grasp the connection on the sides and pull it straight out. With the screws removed, grasp the connection on the sides and pull it straight out.
  • If you did not remove the two 4 mm Phillips head screws in step 12, remove them now using the Phillips head screw driver.

  • With the screws removed, grasp the connection on the sides and pull it straight out.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.