Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
With all of the before mentioned components removed, you can now start removing your motherboard. We recommend taking a picture of the back of the motherboard to keep track of which screws go where.
  • With all of the before mentioned components removed, you can now start removing your motherboard. We recommend taking a picture of the back of the motherboard to keep track of which screws go where.

  • Use the Phillips head screw driver to remove the highlighted eleven 4 mm screws from the motherboard.

  • Use the Phillips head screw driver to remove two 8 mm screws and keep them separate.

  • The two 4 mm screws can be removed now using the Phillips head screw driver, or later. Make sure to keep separate from other similar screws.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.