Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Place laptop upside down to observe the first set of screws on the bottom cover. With the J1 Phillips head screwdriver bit, unscrew eight (8) size 60 mm screws. With a metal spudger, remove the plastic cover to unveil the final screw.
  • Place laptop upside down to observe the first set of screws on the bottom cover. With the J1 Phillips head screwdriver bit, unscrew eight (8) size 60 mm screws.

  • With a metal spudger, remove the plastic cover to unveil the final screw.

  • With the J1 Phillips head bit, remove remaining 60 mm screw.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.