Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
After you have gotten the speaker plate off of the main body of the speaker, there will be two PH1 10mm screws that hold on the speaker. Using the screwdriver and PH1 head from your toolkit, unscrew the 2 screws and place them to the side.
  • After you have gotten the speaker plate off of the main body of the speaker, there will be two PH1 10mm screws that hold on the speaker.

  • Using the screwdriver and PH1 head from your toolkit, unscrew the 2 screws and place them to the side.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.