Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Francese

Traduzione in corso passo 3

Passo 3
There are two ribbon cables securing the keyboard - data and backlight power. Each ribbon connector must be released by flipping the black retainer up with a fingernail or nylon Uspudger before pulling out the ribbon. First flip up the black retainer on the smaller connector. Slide the cable up and out of the connector.
  • There are two ribbon cables securing the keyboard - data and backlight power. Each ribbon connector must be released by flipping the black retainer up with a fingernail or nylon Uspudger before pulling out the ribbon.

  • First flip up the black retainer on the smaller connector. Slide the cable up and out of the connector.

  • Secondly, flip the black connector up on the larger connector. Slide the cable straight out of the connector, parallel to the case.

  • Remove the keyboard from the case.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.