Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 1

Passo 1
It is possible to remove the back cover with an iOpener as seen in this guide but it's a lengthy and difficult procedure. We recommend a heat gun or something similar. The adhesive in the Nexus 6P is extremely sticky and especially the glass and plastic cover on the backside break or bend most of the time whilst doing this repair. Use a SIM card eject tool, to pop out and remove the SIM card tray. Use an iOpener to loosen the adhesive underneath the small plastic cover at the bottom of the phone.
  • It is possible to remove the back cover with an iOpener as seen in this guide but it's a lengthy and difficult procedure. We recommend a heat gun or something similar. The adhesive in the Nexus 6P is extremely sticky and especially the glass and plastic cover on the backside break or bend most of the time whilst doing this repair.

  • Use a SIM card eject tool, to pop out and remove the SIM card tray.

  • Use an iOpener to loosen the adhesive underneath the small plastic cover at the bottom of the phone.

Il est possible de retirer la coque arrière à l'aide d'un iOpener comme démontré ici, mais c'est long et difficile. Nous recommandons un pistolet à air chaud ou un outil similaire. L'adhésif dans le Nexus 6P est très tenace. De plus, la vitre ou la coque arrière en plastique risquent fort de se casser ou déformer au cours de la réparation.

Avec un outil éjecteur de carte SIM, faites sortir le tiroir de la carte SIM.

Servez-vous d'un iOpener pour faire ramollir l'adhésif sous le petit joint en plastique en bas du téléphone.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.