Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the battery to prevent the risk of shocking yourself or damaging the system.
Remove the heatsink cover
  • Remove the battery to prevent the risk of shocking yourself or damaging the system.

  • Locate the large black panel with the round vent. It will have two Phillips head screws. Loosen them with a screwdriver until they start making a clicking noise. The screws stay captive in the cover.

  • You may damage the screw or chassis if you continue to turn the screws when they are loose. Stop turning the screws once they are removed.

  • To remove the panel, pull up from this tab. Lift the panel with the tab located between the screws using a flathead screwdriver or your fingernail. You will encounter resistance from the plastic snap tabs that are on the cover. Gently pry around the corners on either side of the front until the panel pops up. Lift off the panel carefully.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.