Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Secure your wood piece (riser) into place using a drill and galvanized screws. Create two pilot holes with the correct drill bit. Secure the wood (riser) into place by drilling 2" galvanized Phillips head screws into the pilot holes.
  • Secure your wood piece (riser) into place using a drill and galvanized screws.

  • Create two pilot holes with the correct drill bit.

  • Secure the wood (riser) into place by drilling 2" galvanized Phillips head screws into the pilot holes.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.