Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 6guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
When separating the screen assembly from the rest of the device, you will need to disengage five metal clips securing it to the device's frame. Three of these clips are located on the left side of the device, and two are located on the right side.
  • When separating the screen assembly from the rest of the device, you will need to disengage five metal clips securing it to the device's frame.

  • Three of these clips are located on the left side of the device, and two are located on the right side.

  • You will need to work around these clips with your tool in order to fully disengage them.

  • You can either carefully slide the tool around these clips, or leave a pick on one side of the clip while prying the other side with another pick.

Usando l'estremità piatta dello spudger in nylon, tira via il nastro adesivo nero disposto sopra il connettore dello schermo a cui è attaccato il nastro nero.

[* black] Usingred] When separating the screen assembly from the flat endrest of the nylon spudger, pull offdevice, you will need to disengage five metal clips securing it to the black tapedevice's frame.
[* orange] Three of these clips are located
on topthe left side of the screen connector piece thatdevice, and two are located on the right side.
[* black] You will need to work around these clips with your tool in order to fully disengage them.
[* black] You can either carefully slide the tool around these clips, or leave a pick on one side of the clip while prying
the black ribbon is attached toother side with another pick.
[* black] Usingred] When separating the screen assembly from the flat endrest of the nylon spudger, pull offdevice, you will need to disengage five metal clips securing it to the black tapedevice's frame.
[* orange] Three of these clips are located
on topthe left side of the screen connector piece thatdevice, and two are located on the right side.
[* black] You will need to work around these clips with your tool in order to fully disengage them.
[* black] You can either carefully slide the tool around these clips, or leave a pick on one side of the clip while prying
the black ribbon is attached toother side with another pick.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.