Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 9

Passo 9
There are two large pads of adhesive securing the screen assembly near the top edge but further past the 4 mm that have already been sliced through. The front facing sensor array and cable surround the right patch of adhesive from the top and right, so prying or slicing from the top or right edge may damage the cable. The following steps will describe how to separate the adhesive from the left edge.
  • There are two large pads of adhesive securing the screen assembly near the top edge but further past the 4 mm that have already been sliced through.

  • The front facing sensor array and cable surround the right patch of adhesive from the top and right, so prying or slicing from the top or right edge may damage the cable. The following steps will describe how to separate the adhesive from the left edge.

Er bevinden zich twee grote stukken lijm aan de bovenkant van de telefoon die de schermmodule bevestigen. Deze bevinden zich echter dieper in de telefoon dan de 4 mm die je al hebt doorgesneden.

De naar voren gerichte sensoropstelling en -kabel ligt om het rechter stuk lijm heen, aan de rechter- en bovenkant. Als je deze dus vanaf de rechter- of bovenkant probeert los te wrikken, zul je de kabel beschadigen. De volgende stappen beschrijven hoe je de lijm vanaf de linkerkant kunt doorsnijden.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.