Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 9

Passo 9
There are two large pads of adhesive securing the screen assembly near the top edge but further past the 4 mm that have already been sliced through. The front facing sensor array and cable surround the right patch of adhesive from the top and right, so prying or slicing from the top or right edge may damage the cable. The following steps will describe how to separate the adhesive from the left edge.
  • There are two large pads of adhesive securing the screen assembly near the top edge but further past the 4 mm that have already been sliced through.

  • The front facing sensor array and cable surround the right patch of adhesive from the top and right, so prying or slicing from the top or right edge may damage the cable. The following steps will describe how to separate the adhesive from the left edge.

Hay dos grandes almohadillas de adhesivo que aseguran el ensamblaje de la pantalla cerca del borde superior pero más allá de los 4 mm que ya han sido cortados.

El ensamblaje de sensores frontales y el cable rodean el parche de adhesivo de la parte superior y derecha, por lo que si se fisgonea o se corta desde el borde superior o derecho se puede dañar el cable. Los siguientes pasos describirán cómo separar el adhesivo del borde izquierdo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.