Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 4
Slide your opening pick all along the right side of the device to release the clips and adhesive securing the screen assembly.
|-||[* red] Insert the black spudger under the lock of the latch connecting the black ribbon of the screen to the phone body.|
|-||[* black] Pull up on the lock to unlock the latch.|
|-||[* black] Separate the black ribbon from the latch by pulling gently to the left.|
|+||[* black] Slide your opening pick all along the right side of the device to release the clips and adhesive securing the screen assembly.|
|+||[* icon_caution] As you separate the lower part of the right edge, you should encounter the two metal clips mentioned previously. If you do not see or feel these clips, you are only separating the top half of the assembly! If so, press the screen back down into place and start again from the beginning of the screen removal process.|