Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 10

Passo 10
Remove the speaker. The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.
  • Remove the speaker.

  • The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.

  • To help protect against water and dust intrusion, replace the adhesive gasket during reassembly. Prep the area by cleaning it with a bit of isopropyl alcohol and a lint-free cloth or coffee filter so that the gasket adheres properly. Install a new gasket onto the speaker, and then install the speaker.

移除扬声器。

扬声器下的胶圈是一次性的。使用镊子移除所有剩下的粘胶。

为了保留防水防尘能力,重新组装时请重新安装胶圈。为了使胶圈能够完美贴合,请使用无纺布或咖啡滤纸蘸一点异丙醇来清理该区域。先将新的胶圈安装到扬声器上,再安装扬声器。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.