Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 10

Passo 10
Remove the speaker. The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.
  • Remove the speaker.

  • The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.

  • To help protect against water and dust intrusion, replace the adhesive gasket during reassembly. Prep the area by cleaning it with a bit of isopropyl alcohol and a lint-free cloth or coffee filter so that the gasket adheres properly. Install a new gasket onto the speaker, and then install the speaker.

Retirez le haut-parleur.

Le joint adhésif du haut-parleur n'est pas réutilisable. Nettoyez tous les résidus d'adhésif avec une pincette.

Lors du remontage, remplacez le joint adhésif pour une protection plus efficace contre l'intrusion d'eau et de poussières. Nettoyez la surface avec un peu d'alcool isopropylique et un chiffon non pelucheux ou un filtre à café pour que le joint adhére correctement. Collez un nouveau joint sur le haut-parleur, puis posez le haut-parleur.

[* black] Remove the speaker.
[* icon_reminder] The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.
[* icon_reminder] To help protect against water and dust intrusion, replace[product|IF377-023|replace the adhesive gasketgasket|new_window=true] during reassembly. Prep the area by cleaning it with a bit of isopropyl alcohol and a lint-free cloth or coffee filter so that the gasket adheres properly. Install a new gasket onto the speaker, and then install the speaker.
[* icon_reminder] To help protect against water and dust intrusion, replace[product|IF377-023|replace the adhesive gasketgasket|new_window=true] during reassembly. Prep the area by cleaning it with a bit of isopropyl alcohol and a lint-free cloth or coffee filter so that the gasket adheres properly. Install a new gasket onto the speaker, and then install the speaker.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.