Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 6le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Remove five Y000 screws securing the logic board connector bracket, of the following lengths:
  • Remove five Y000 screws securing the logic board connector bracket, of the following lengths:

  • Three 1.1 mm screws

  • One 3.1 mm screw

  • One 3.7 mm screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

Entferne die fünf Y000 Schrauben, welche die Halterung des Verbinders des Logic Board befestigen:

Drei 1,1 mm Schrauben

Eine 3,1 mm Schraube

Eine 3,7 mm Schraube

Achte bei dieser Reparatur auf jede Schraube und stelle sicher, dass jede Schraube wieder genau an ihren alten Platz eingedreht wird. Vermeide damit, dass das Smartphone beschädigt wird.

[* black] Remove the fivefive Y000 screws securing the logic board connector bracketbracket, of the following lengths:
[* black] Remove the fivefive Y000 screws securing the logic board connector bracketbracket, of the following lengths:
[* red] Three 1.1 mm screws
[* orange] One 3.1 mm screw
[* yellow] One 3.7 mm screw
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your iPhone.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.