Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Remove the power button cover from the controller. If the LB/RB assembly is separate, remove this next. A plastic pry tool can be used. Remove the wireless sync button. Place this on a bright surface to avoid misplacement. Remove the wireless sync button. Place this on a bright surface to avoid misplacement.
Disassemble the controller (Part 3)
  • Remove the power button cover from the controller. If the LB/RB assembly is separate, remove this next. A plastic pry tool can be used.

  • Remove the wireless sync button. Place this on a bright surface to avoid misplacement.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.