Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
Use a flat blade screwdriver to separate the two halves of the boiler. Inside the boiler, you can see the main components: Boiler housing (to contain water and steam).
  • Use a flat blade screwdriver to separate the two halves of the boiler. Inside the boiler, you can see the main components:

  • Boiler housing (to contain water and steam).

  • Heater coil.

  • Dual thermal sensors, presumably one to maintain steam temperature and one for max temperature shut down.

  • The bottom portion of the boiler housing has a rigid hose reaching toward the top of the boiler to draw water from the top to keep the heater coil immersed in water.

  • There are also two Klixon thermal sensors. The numbers stamped around their bases are:

  • 1NT01L-0036 L95-10 9910 M 10/250~T200

  • 1NT01L-0499 L127-15 9912 M 10/250~T200

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.