Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown). Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.
  • Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown).

  • Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.

  • At this point, the boiler is free from the Barista and can be removed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.