Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Cinese

Traduzione in corso passo 4

Passo 4
Use a spudger to carefully lever up the daughterboard and remove it. Don't break the small clamps that hold down the daughter board but press them a little bit to the side to make the removal easier. Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky. If you're having a hard time while removing the loudspeaker  you can use an iOpener to loosen the adhesive and try it again.
  • Use a spudger to carefully lever up the daughterboard and remove it. Don't break the small clamps that hold down the daughter board but press them a little bit to the side to make the removal easier.

  • Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky.

  • If you're having a hard time while removing the loudspeaker you can use an iOpener to loosen the adhesive and try it again.

使用撬棒小心地拉起子板并将其取下。不要破坏压住子板的夹扣,而是将它们向侧面按压一下,以便更容易拆卸。

使用撬棒取下扬声器和充电端口。下面有一些粘合剂,可能会有点粘。

如果你在取下扬声器时遇到困难,可以使用iOpener 软化粘合剂并再次尝试。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.