Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
Use a spudger to carefully lever up the daughterboard and remove it. Don't break the small clamps that hold down the daughter board but press them a little bit to the side to make the removal easier. Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky. If you're having a hard time while removing the loudspeaker  you can use an iOpener to loosen the adhesive and try it again.
  • Use a spudger to carefully lever up the daughterboard and remove it. Don't break the small clamps that hold down the daughter board but press them a little bit to the side to make the removal easier.

  • Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky.

  • If you're having a hard time while removing the loudspeaker you can use an iOpener to loosen the adhesive and try it again.

Usa un spudger para cuidadosamente levantar la placa hija y removerla. No rompas las pequeñas abrazaderas que sujetan la placa hija pero presiónales un poco hacia un lado para hacer que la extracción sea más fácil.

Usa un spudger para remover el altavoz y el puerto de carga. Hay algo de adhesivo debajo y la unidad podría estar un poco pegajosa.

Si te resulta difícil remover el altavoz puede utilizar un iOpener para ablandar el adhesivo y tratar de nuevo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.