Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Start by carefully removing the remaining broken glass parts from the Philips Hue lightbulb. On this example, glass parts have already been removed. Then use your Groove Joint Pliers to gently crush and remove the screw thread contact of the IKEA lightbulb. Once removed, you'll be able to extract the LED controller using your fingers. You might have to use a pliers again.
Screw thread contact and LED controller
  • Start by carefully removing the remaining broken glass parts from the Philips Hue lightbulb. On this example, glass parts have already been removed.

  • Then use your Groove Joint Pliers to gently crush and remove the screw thread contact of the IKEA lightbulb.

  • Once removed, you'll be able to extract the LED controller using your fingers. You might have to use a pliers again.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.