Skip to main content
Spagnolo
Inglese

iPhone 5c logic board replacement

Informazioni Guida

= Fatto = Incompleto

      Descrivi la parte specifica o il componente di questo device sul quale stai lavorando. Es: Batteria

      Crea un titolo.

      Questo breve sommario di 1-2 frasi apparirà nei risultati di ricerca.

      Comunica informazioni di base prima che il lettore si immerga nella guida.

      Passi Guida

      Passo 1 — Get Informed before Repair

      With a grand variety of colors to choose (white, blue, pink, green, and yellow), we decided on blue

      Passo 2 — SIM Card

      Remember to take out the SIM tray

      Passo 3 — Unscrewing the Screws

      These super small Pentalobe screws are slightly different than those of the iPhone 5 and 5s.

      Passo 4 — Opening the Iphone

      Now with a suction tool, we lift the screen.

      Passo 5 — Battery

      Now we UNSCREW the two marked screws (see image).

      Passo 6 — Display

      Remove the following Phillips #000 screws that hold support to the front panel assembly to the logic board.

      Passo 7 — Display Cables

      Use a plastic spudger tool to disconnect the front camera and the connector for the sensor cable.

      Passo 8

      Use a plastic spudger to disconnect the LCD cable from its connector.

      Passo 9

      Remove the front panel from the back case.

      Passo 10 — Remove All Screws

      Remove all of the Phillips #000 screws (2.0mm) that are fixed to the logic board.

      Passo 11 — Logic Board Front Part

      The front part of the logic board:

      Passo 12 — Logic Board Rear Part

      The back portion of the logic board:

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.