Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Take a small flat screwdriver and displace the 5 tabs holding the keyboard one by one.  Start on the right end and push the tabs in towards the screen as you lift the keyboard up. Lift the keyboard being careful with the flex cable. Release the keyboard ribbon from the motherboard by carefully sliding the black plastic part of the connector to the right.
  • Take a small flat screwdriver and displace the 5 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.

  • Lift the keyboard being careful with the flex cable.

  • Release the keyboard ribbon from the motherboard by carefully sliding the black plastic part of the connector to the right.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.