Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver. Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool. Press the battery from the back  of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.
  • Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver.

  • Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.

  • Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.

  • Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.