Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Using a #1 Phillips screwdriver, remove the screws holding the heat sink in place. Remember, there are also screws hidden underneath the thermal pad. Next, use a metal spudger to gently pry the logic board up and out of the device. This will allow easier access to the power supply.
  • Using a #1 Phillips screwdriver, remove the screws holding the heat sink in place.

  • Remember, there are also screws hidden underneath the thermal pad.

  • Next, use a metal spudger to gently pry the logic board up and out of the device. This will allow easier access to the power supply.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.