Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
The power supply is attached at three different points: the logic board/power supply connector, two screws and a heavy piece of tape, located underneath the power supply. Locate the connector attaching the power supply to the logic board. Using a pair of tweezers, gently remove the connector from the power supply.
  • The power supply is attached at three different points: the logic board/power supply connector, two screws and a heavy piece of tape, located underneath the power supply.

  • Locate the connector attaching the power supply to the logic board. Using a pair of tweezers, gently remove the connector from the power supply.

  • Using a #1 Phillips screwdriver, remove the two screws located toward the front of the device.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.