Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
Using a metal spudger or a prying tool, gently push forward to separate the cover from the speaker. After lifting the cover, you will see two ribbons attaching the cover to the speaker. Gently remove these ribbons by pulling straight down. After lifting the cover, you will see two ribbons attaching the cover to the speaker. Gently remove these ribbons by pulling straight down.
  • Using a metal spudger or a prying tool, gently push forward to separate the cover from the speaker.

  • After lifting the cover, you will see two ribbons attaching the cover to the speaker. Gently remove these ribbons by pulling straight down.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.