Skip to main content

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 2

Step 2
Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.
  • Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.

  • When removing this connector, it is helpful to use your thumbnails to push the ears on either side of the connector toward the top of your iMac.

Scollegare il connettore del sensore termico dell'unità ottica dalla scheda logica, estraendolo verso la parte superiore dell'iMac.

Durante la rimozione del connettore, può essere utile premere con i pollici le linguette sui lati del connettore verso la parte superiore dell'iMac.

[* blackred] Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.
[* icon_note] When removing this connector, it is helpful to use your thumbnails to push the ears on either side of the connector toward the top of your iMac.
[* blackred] Disconnect the optical drive thermal sensor connector from the logic board by pulling its connector toward the top of your iMac.
[* icon_note] When removing this connector, it is helpful to use your thumbnails to push the ears on either side of the connector toward the top of your iMac.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.