Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Before you proceed, make sure your computer is turned off and it's not connected to any power source. Using #1 Phillips screwdriver remove the 13 (9mmx6mm) screws holding the back.
  • Before you proceed, make sure your computer is turned off and it's not connected to any power source.

  • Using #1 Phillips screwdriver remove the 13 (9mmx6mm) screws holding the back.

  • Gently pry the back off using a plastic opening tool, starting from one of the corners.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.