Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Grasping the motherboard by its edges, left the bottom end up at an angle, while keeping the top edge close to the phone. Use your spudger to pry up the front-facing camera and make sure it separates safely from the frame. The camera can remain attached to the motherboard. Using your tweezers, grasp the headphone jack flex cable and carefully pull it out of its socket as you remove the motherboard.
  • Grasping the motherboard by its edges, left the bottom end up at an angle, while keeping the top edge close to the phone.

  • Use your spudger to pry up the front-facing camera and make sure it separates safely from the frame. The camera can remain attached to the motherboard.

  • Using your tweezers, grasp the headphone jack flex cable and carefully pull it out of its socket as you remove the motherboard.

  • Remove the motherboard.

  • If you feel any resistance, stop. Make sure there are no components still holding the frame to the motherboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.