Salta al contenuto principale

Procedura di apertura di Microsoft Surface Pro 5

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 14

Passo 14
Microsoft Surface Pro 5 Opening Procedure, Open the Surface: passo 0, immagine 1 di 3 Microsoft Surface Pro 5 Opening Procedure, Open the Surface: passo 0, immagine 2 di 3 Microsoft Surface Pro 5 Opening Procedure, Open the Surface: passo 0, immagine 3 di 3
Open the Surface
  • Very slowly lift the screen assembly away from the Surface case. If you encounter any resistance, stop and check that all the adhesive is separated.

  • Do not remove the screen yet. It is still connected to the motherboard by two cables.

  • Use an opening pick to cut through any remaining adhesive.

  • The flash lens may fall out of the Surface case. Keep track of the lens and return it to its cutout in the case during reassembly.

Solleva molto lentamente il gruppo schermo dalla custodia del Surface. Se incontri resistenza, fermati e controlla che tutto l'adesivo sia separato.

Non rimuovere ancora lo schermo. È ancora collegato alla scheda madre tramite due cavi.

Usa un plettro di apertura per tagliare l'adesivo rimasto.

L'obiettivo del flash potrebbe cadere dalla custodia di Surface. Tieni traccia dell'obiettivo e rimettilo nella sua fessura nel case durante il rimontaggio.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.