Traduzione in corso passo 8
Passo 8
Remove USB board, VGA board, and screws
-
Remove the three small screws from the USB board, and remove the USB board.
-
Remove the two small screws from the VGA board.
-
Remove the one long screw from the VGA board, and remove the VGA board. This is a tight fit and may require a little jiggling to remove/replace.
-
Remove the five small screws from the motherboard.
-
Remove the four long screws from the motherboard/CPU cooler.
-
Remove the two short screws from the DP/USB/Firewire board.
-
Remove the two mid-length screws from the left speaker, and disconnect the speaker connector from the motherboard.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.