Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 2
Passo 2
-
Position the camera with the lens facing down and the shutter button facing you.
-
Lift the metal plate away from the camera without removing it fully. There is a ribbon attaching the edge of the plate to the camera.
-
Carefully pry the spudger under the black latch and lift gently upward. The ribbon will slide out easily.
-
With the ribbon unlatched, the entire metal plate should now be detached.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.