Nikon COOLPIX P500 Motherboard Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Italiano

Traduzione in corso passo 3

Passo 3

Separate the two parts of the body of the camera slightly.
Release the two cables by lifting up their respective clips with a spudger.
Make sure not to pull too hard because there are connector ribbons.
Detach the connector ribbons before fully separating the camera into two pieces.
These pictures were taken after the connector ribbons were released and the camera was separated into two parts. You will need to release the connector ribbons while the camera is still in one piece before you can separate it like the pictures.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.