Trek 4300 Bicycle Brakes Replacement

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2

Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: passo 0, immagine 1 di 3

Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: passo 0, immagine 2 di 3

Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: passo 0, immagine 3 di 3

Removing the Brake Pads

Next, take the nut completely off of the bolt.
There are 5 washers per brake pad so be sure not to misplace any.
It helps to place the nut and washers in order to make reassembly easier.
Remove the three washers in between the nut and caliper. These will be referred to as the outside washers.
Next remove the brake pad from the caliper and remove the two washers sitting in between the caliper and the break pad. These will be referred to as the inside washers.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.