How to clean the Vent-Axia MVHR Cell

Inglese

Italiano

Traduzione in corso passo 11

Passo 11

Turn the heat recovery back on
It will go through its initial power on so don't expect the fans to start immediently.
If you have a message on the screen saying check filters you can clear it (once the filters have been cleaned) by:
Waiting until Normal airflow xx% is displayed on the screen
Press and hold the up and down arrows for 5 seconds
This will reset the cycle for the filter clean. Whenever you see the check filter message clean the filter (remember this is separate to the cell).
Keeping your MVHR cleaned to the Vent-Axia recommendations gives you the best chance of having many years of trouble free service.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.