Salta al contenuto principale

Magic Bullet Teardown

Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Magic Bullet Teardown: passo 0, immagine 1 di 3 Magic Bullet Teardown: passo 0, immagine 2 di 3 Magic Bullet Teardown: passo 0, immagine 3 di 3
  • With the screws removed, lift the base of the body. Remove the wire mount out of the base and guide the electrical wire through the base.

  • For this teardown, the fan blade on the motor shaft was removed. Remove the snap ring by inserting the corner of a flat tip screw driver.

  • Simply twist the screw driver so that the snap ring will come away from the shaft.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.