Traduzione in corso passo 4
Passo 4
-
With the blade gear removed, it is time to focus on the power base. Use a small screwdriver or similar to remove the four rubber feet from the base. No glue is used, they are simply pressed in the openings
-
Underneath each one of the rubber feet is a screw that can be removed with either a Phillips or flat head screw driver.
-
Here are the four screws and the rubber feet once they are removed. The screws are 1/8X1/2 self tapping.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.