Salta al contenuto principale

Magic Bullet Teardown

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Magic Bullet Teardown: passo 0, immagine 1 di 3 Magic Bullet Teardown: passo 0, immagine 2 di 3 Magic Bullet Teardown: passo 0, immagine 3 di 3
  • To remove the blade gear, turn the power base so that the bottom part faces up.

  • Remove the quality control sticker

  • The sticker covers a rectangular opening. Within this opening is a slot for a flat tip screwdriver. It is possible that it is somewhat off center like in this picture.

  • This is caused by the motor not being properly centered within the base. This appears to be common (the motor does not have any bottom support within the base)

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.