Release a Snagged Stitch on an Insulated Jacket

Inglese

Italiano

Traduzione in corso passo 3

Passo 3

Release the thread loop

The goal is to redistribute the thread in the loop back into the stitch. This will also release the fabric bunching, which often occurs on both sides of the loop. Either distribute half of the thread loop to each side or work from the middle outwards.
Grab a pointed tool small enough to slide under the stitches, like an awl, toothpick, or safety pin. Don't use a seam ripper.
Starting on the stitch directly next to the loop, use the pointed tool to carefully pull the loop thread through the stitch.
Continue pulling the loop through stitch-by-stitch. The loop will get smaller and smaller as the thread is distributed evenly to each stitch.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.