Pentax Spotmatic Light Meter Calibration

Inglese

Italiano

Traduzione in corso passo 4

Passo 4

Make adjustments

Use a pick to adjust the variable resistor through the opening in the top plate.
Turn it until the needle in the viewfinder is centered in the opening, indicating a proper exposure.
The adjustment resistor shown with the top cover removed.
Repeat steps 3 and 4 for several different light levels.
Since the Spotmatic only has one adjustment resistor, it may not be possible to center the needle at every light level. Make compromises as necessary.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.