Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Ensure the laptop is powered off.
-
Turn the device over so the bottom is facing up.
-
Remove the 13 6 mm screws from the bottom of the device using a Phillips #0 screwdriver.
-
Carefully glide a Jimmy along the seam of the casing.
-
Remove the back cover of the laptop.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.