Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.
Traduzione in corso passo 1
Passo 1
Unfasten the loudspeaker
-
Use your tri-point Y000 driver to remove the 1.3 mm screw securing a grounding contact and the loudspeaker.
-
Use your Phillips #000 driver to remove the four screws securing the loudspeaker:
-
Two 1.6 mm screws
-
Two 2.0 mm screws
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.