Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
Unfasten the Taptic Engine connector cover
-
Use your Phillips #000 driver to remove the four screws securing the Taptic Engine and its connector cover:
-
One 1.4 mm‑long screw
-
One 1.9 mm‑long screw (larger screw head)
-
One 1.9 mm‑long screw (smaller screw head)
-
One 2.1 mm‑long screw
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.