Lenovo Legion 7i screen Replacement

Inglese

Italiano

Traduzione in corso passo 2

Passo 2

Discharge

Ground your self to remove static from your working surfaces (hands, gloved hands preferable) touch the heat sink or vapor chamber. Pull out black battery connector of silver outlet. make sure to not have battery connector touch anything. You do not need to remove battery out of chassis entirely.
Using electric tape- tape off battery connector now disconnected from motherboard connection as seen in pic marked in red so that it may not accidently touch any other part on the board and short anything
Make sure to hold power button after disconnecting battery to discharge the capacitors that hold ambient charge so that no shorts occur during the swapping of the display panels.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.