E-bike Disassembly of frame for painting (model: HNF UD1)

Inglese

Italiano

Traduzione in corso passo 22

Passo 22

Remove the black design cover

Remove the screw next to the battery charging port with a PH1 Screwdriver [marked with red circle]
This screw is the smallest of the three types
Remove the upper screw with a 3 mm hex key on both sides. (2x in total) [marked with blue circle on this side]
These screws are slightly longer and thinner, than the lowest screws

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.