Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 3
Passo 3
-
Gently lift the screen and pull it apart from the camera, taking care to unslot the screen brackets from the tabs on the bottom and left side of the camera.
-
Do not pull too hard on the screen as there is still another delicate cable running from the screen to the rear board of the camera.
-
Gently pull the wide ribbon (shown in an earlier step) cable from the front of the camera to the back using tweezers.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.