Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Remove the 7 screws holding the motherboard in the case with a Phillips #00 screwdriver.
-
Remove the press fit connector attaching the motherboard to the screen.
-
Remove the two cables that are still attached to the motherboard. You will need to use needle nose tweezers to remove these.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.