Traduzione in corso passo 1
Passo 1
Starting off
-
First remove the back part of the wii remote and the batteries. Then use the tri wing screw to unscrew the four small screws.
-
Next use a flathead screwdriver or maybe even your finger nails to pry apart the two pieces. There is a clip on either side of the d-pad which require the base piece to be squeezed inwards.
-
BE CAREFUL TAKING THE TWO PIECES APART! IF NOT DONE CAREFULLY YOU MIGHT END UP WITH ALL THE INNER PIECES FLYING EVERYWHERE!
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.